How Many Tiles for a 200 Sq Ft Room?

Updated November 2026

A 200 sq ft room, often a 10×20 kitchen or a large bathroom, is big enough that a small counting mistake becomes a whole box short. Here is the exact tile count for the standard 12×12 tile, worked out the same way the Tile Calculator works it out, with the counts for every common tile size and pattern.

Quick Answer

A 200 sq ft room needs 196 tiles of 12×12 inches exactly, counted with a standard 1/8 inch grout gap. Buy 216 tiles with the standard 10% extra for cuts, breakage and waste. In larger tiles: 109 tiles of 12×24, or 55 tiles of 24×24, with the same extra included.

Your room or tile size is different? The Tile Calculator works out the exact count and boxes for any room, tile size and grout gap.

The Math, Step by Step

Step 1: Find the room area. For a 10×20 ft room: 10 × 20 = 200 sq ft.

Step 2: Find the area of one tile, with its grout gap. Tiles sit with a small gap between them (1/8 inch here). So one 12×12 tile really covers (12 + 0.125) × (12 + 0.125) ÷ 144 = 1.0209 sq ft. The gap is small, but over 200 tiles it adds up to real coverage.

Step 3: Divide. 200 ÷ 1.0209 = 195.9, rounded up to whole tiles = 196 tiles. Tiles are only sold whole, so every count on this page rounds up.

Step 4: Add 10% for cuts and waste. 196 × 1.10 = 215.6, rounded up again = 216 tiles to buy.

If you counted without the grout gap you would get 220 tiles. The gap method is the honest count, and it is the one the calculator and this site’s other tile guide use.

Tiles Needed for 200 Sq Ft by Tile Size

All counts are counted with a 1/8 inch grout gap and include 10% extra for cuts, breakage and waste.

Tile SizeCoverage Per Tile (with gap)Exact TilesTiles to Buy
4×4 inches0.118 sq ft1,6931,863
6×6 inches0.261 sq ft768845
8×8 inches0.458 sq ft437481
12×12 inches1.021 sq ft196216
12×24 inches2.031 sq ft99109
16×16 inches1.806 sq ft111123
18×18 inches2.281 sq ft8897
24×24 inches4.042 sq ft5055

For a typical 200 sq ft room, 12×12 and 12×24 inch tiles are the most common choices. Bigger tiles mean fewer pieces to lay and fewer grout lines to clean.

A 10 × 20 Floor in 12×12 Tiles 10 tiles across × 20 tiles down = 200 tile spaces The grout gaps make each tile cover a little more, so the real count is 196, not 200

Counted with a standard 1/8 inch grout gap, the same way the Tile Calculator counts.

How Many Boxes of Tiles for 200 Sq Ft?

Tiles are sold by the box. A box of 12×12 tiles that “covers 10 sq ft” holds 10 tiles, so boxes are just the tile count divided by the tiles in the box, rounded up. For the 216 tiles this room needs:

Coverage Per BoxTiles Per Box (12×12)Boxes Needed
5 sq ft544 boxes
10 sq ft1022 boxes
12 sq ft1218 boxes
15 sq ft1515 boxes
16 sq ft1614 boxes
20 sq ft2011 boxes
25 sq ft259 boxes

Always round up to the next full box, and check the coverage printed on the packaging before you order: it is the number the store guarantees.

Which Tile Pattern Should You Choose?

The pattern changes how many cuts are needed, so it changes how much extra to buy.

Tile PatternSuggested WasteDifficultyAppearance
Straight lay10%EasyClean, classic
Running bond10–15%Easy–mediumBrick-style
Diagonal (45°)15%MediumAngled, decorative
Herringbone15–20%HardZigzag, elegant
Basket weave10–15%MediumTraditional
Modular pattern15–20%HardMixed tile sizes

For a 200 sq ft room, straight lay is the easiest option for beginners because it needs the fewest complicated cuts. Waste allowances are planning estimates: rooms with many corners, niches or irregular edges need more.

How Much Does Tile Flooring Cost for 200 Sq Ft?

Costs below are for the 216 tiles (216 sq ft of tile) this room needs. They cover tile material only.

Tile MaterialExample Price Per Sq FtMaterial Cost for 216 Sq Ft
Ceramic tile$1–$5About $216–$1,080
Porcelain tile$2–$8About $432–$1,728
Natural stone tile$5–$15About $1,080–$3,240
Marble tile$5–$20About $1,080–$4,320
Glass tile$7–$25About $1,512–$5,400

Adhesive, grout, underlayment, waterproofing, tools and labor are additional. A bathroom may also need waterproofing materials, while a kitchen floor may need extra surface preparation.

These are example prices only. Prices change by area, supplier and type.

How Many Tiles for Different Room Sizes?

All counts use 12×12 inch tiles with a 1/8 inch grout gap and include 10% extra for waste.

Room SizeSquare FeetTiles to Buy
8×10 ft80 sq ft87 tiles
10×10 ft100 sq ft108 tiles
10×12 ft120 sq ft130 tiles
10×15 ft150 sq ft162 tiles
10×20 ft200 sq ft216 tiles
12×18 ft216 sq ft234 tiles
15×15 ft225 sq ft244 tiles
15×20 ft300 sq ft324 tiles
20×20 ft400 sq ft432 tiles

For rooms with unusual dimensions, measure the actual floor area before you count: closets and alcoves add tiles fast.

What Else Do You Need for a 200 Sq Ft Tile Floor?

Thinset mortar: about 3–5 bags (50 lb each) as a planning allowance for this size floor. The real number depends on tile size and trowel notch size, so check the coverage chart on the bag.

Grout: the amount depends on tile size, joint width and tile thickness. Check the grout manufacturer’s coverage chart for your combination.

Tile spacers: pick spacers that match your grout joint width (1/8 inch spacers for the counts on this page).

Underlayment: about 200 sq ft of coverage, plus a little extra for seams and cuts if your system needs it.

Tile leveling system: optional, but a real help with larger tiles like 12×24 and 24×24.

Transition strips: where the tile floor meets another flooring material.

For bathrooms and other wet areas, use a proper waterproofing system where it is required, and always follow the tile, mortar, grout and substrate manufacturers’ instructions.

Ceramic vs. Porcelain Tiles

FeatureCeramic TilePorcelain Tile
Typical priceUsually lowerUsually higher
Water absorptionGenerally higherVery low for certified porcelain
DurabilityGood for suitable residential useOften suitable for heavier use
CuttingUsually easierOften needs more effort
Best forKitchens, bathrooms, living spacesHigh-traffic areas and suitable wet locations
InstallationGenerally easier to cutMay need specialized cutting tools

For a 200 sq ft bathroom or kitchen, choose a floor-rated tile with the right slip resistance for the room. Porcelain is a good option where low water absorption and durability matter most.

Mistakes to Avoid

Forgetting the waste allowance. Cutting tiles around walls, doorways and corners creates waste. Add about 10% for a simple layout and more for complicated patterns.

Confusing tile size with box coverage. A box of 12×24 tiles holds several tiles. Always check the total square footage and the tile count printed on the box.

Not measuring the actual floor area. A room described as 200 sq ft may have closets, alcoves or irregular sections. Measure each section and add them up.

Buying tiles from different batches. Shade and size vary slightly between production lots. Buy all your tiles in one order, from one batch, and keep one spare box after the job for future repairs: a tile bought later may not match.

Ignoring the grout gap in the count. It looks tiny, but over a whole floor the gaps add up to several tiles of coverage. Counting with the gap, like this page does, keeps the order honest.

Your Room Is Different?

🧮 Use the Tile Calculator: Type any room size, tile size and grout gap and get the tile count and boxes in seconds.

Tiling a smaller room? The 100 sq ft tile guide works through the same math at half the size. For other flooring, the Flooring Calculator counts boxes of laminate, vinyl or hardwood.

Questions People Ask

How many tiles do I need for a 200 sq ft room?

With 12×12 inch tiles and a 1/8 inch grout gap: 196 tiles exactly, and 216 to buy with 10% extra for cuts and breakage. With 12×24 tiles buy 109, and with 24×24 tiles buy 55.

Why does the grout gap change the tile count?

Each tile covers its own area plus its share of the grout gap. A 12×12 tile with a 1/8 inch gap covers 1.0209 sq ft instead of exactly 1 sq ft, so over a 200 sq ft floor you need a few tiles fewer than the no-gap count.

How many boxes of tile for 200 sq ft?

It depends on the box. If a box holds 10 tiles of 12×12, you need 22 boxes for this room. Divide your tile count by the tiles per box and always round up.

How much extra tile should I buy for a diagonal or herringbone pattern?

Buy 15% extra for a diagonal pattern and 15–20% for herringbone. Angled patterns waste more at every wall. For a straight pattern, 10% is the standard.

Ceramic or porcelain for a 200 sq ft floor?

Ceramic costs less and is easier to cut, and it suits most kitchens and living spaces. Porcelain absorbs very little water and wears harder, which makes it the safer pick for bathrooms and heavy-traffic areas.

How much thinset and grout do I need?

Plan on about 3–5 bags of thinset (50 lb) for a 200 sq ft floor, depending on tile size and trowel notch. Grout depends on tile size, joint width and thickness. Check both manufacturers’ coverage charts before you buy.

More Example Guides

Please note: Results are planning estimates. Actual tile dimensions, grout joints, and layout may affect the final quantity. Confirm with your tile supplier before ordering.

Planning a bigger job for a customer? Our free Estimate Maker turns your numbers into a clean estimate.