Cubic Yard Calculator

Updated October 2026

Work out how many cubic yards of dirt, soil, mulch, gravel, stone, sand or concrete you need. Enter the size of your area and its depth, and this cubic yards calculator (also called a yardage calculator, a cubic yardage calculator or a cu yd calculator) gives the volume in cubic yards, cubic feet and cubic meters, plus weight and cost if you want them. Use it as a soil calculator for garden beds, a bulk material calculator for deliveries, or a landscape material calculator for a whole yard project.

Quick answer: 1 cubic yard = 27 cubic feet. To find cubic yards: first change the depth into feet (inches ÷ 12), then multiply length × width × depth to get cubic feet, and divide by 27.
Table of Contents

Calculate Cubic Yards

Common depths: mulch and soil 2 to 3 inches, gravel driveways 4 to 6 inches, concrete slabs 4 inches.

Results are estimates. Loose materials settle, and real areas are rarely perfect squares, so confirm the final amount with your supplier before ordering.

Cubic Yard Formula: How to Calculate Cubic Yards

It takes three short steps:

Step 1: Change the depth into feet: inches ÷ 12.
Step 2: Multiply: Length × Width × Depth (all in feet). That answer is the volume in cubic feet.
Step 3: Divide by 27 to get cubic yards, because one cubic yard is exactly 27 cubic feet.

Worked example

Your garden bed is 10 feet long, 10 feet wide, and you want the soil 3 inches deep:

Step 1: 3 inches ÷ 12 = 0.25 feet.
Step 2: 10 × 10 × 0.25 = 25 cubic feet.
Step 3: 25 ÷ 27 = 0.93 cubic yards.
Most suppliers round up, so you would order 1 cubic yard, or a little more with the extra for settling.

For a round bed or a circular area, use the Circle shape in the calculator: it works out the area from the diameter (the width across the middle) for you. For a triangular corner, use the Triangle shape (base × height ÷ 2).

Uneven or irregular areas: split the area into simple rectangles, triangles and circles, work out each part with this calculator, then add the cubic yards together.

Cubic Feet to Cubic Yards, and Square Feet to Cubic Yards

Cubic feet to cubic yards: just divide by 27.

Cubic feetCubic yards
271
542
813
1084
1355

And the other way round, cubic yards to cubic feet (multiply by 27): 1 cubic yard = 27 cubic feet, 2 cubic yards = 54, 3 = 81, 4 = 108, 5 = 135. So if you are asking how many cubic feet is 2 cubic yards, the answer is 54 cubic feet.

Cubic inches to cubic yards: divide cubic inches by 46,656, because 1 cubic yard = 46,656 cubic inches. For example, 100,000 cubic inches ÷ 46,656 ≈ 2.14 cubic yards.

Cubic yards to gallons: 1 cubic yard ≈ 202 US gallons. Multiply cubic yards by 202 to get gallons (2 cubic yards ≈ 404 gallons).

Cubic meters to cubic yards: 1 cubic meter ≈ 1.308 cubic yards. Multiply cubic meters by 1.308 to change them into cubic yards (for example, 5 cubic meters ≈ 6.54 cubic yards).

Square feet to cubic yards: square feet alone is not enough, because it has no depth. First multiply the square feet by the depth in feet, then divide by 27. For a 100 sq ft area:

Depth100 sq ft needs
2 inches0.62 cubic yards
3 inches0.93 cubic yards
4 inches1.23 cubic yards
6 inches1.85 cubic yards

How Much Does One Cubic Yard Cover?

One cubic yard covers less area the deeper you spread it:

DepthArea covered by 1 cubic yard
1 inch324 sq ft
2 inches162 sq ft
3 inches108 sq ft
4 inches81 sq ft
6 inches54 sq ft
12 inches27 sq ft

Cubic Yards to Tons and Bags

Suppliers sometimes sell by weight instead of volume. These are typical weights for one cubic yard; the real weight changes with moisture, so treat them as good estimates, not exact numbers:

MaterialWeight of 1 cubic yard
Gravelabout 2,800 lb (1.4 tons)
Sandabout 2,800 lb (1.4 tons)
Crushed stoneabout 2,800 lb (1.4 tons)
Topsoilabout 2,000 to 3,000 lb (1 to 1.5 tons), varies with moisture
Mulchabout 400 to 800 lb (0.2 to 0.4 tons)
Concreteabout 4,050 lb (2 tons)

Quick math: Tons = cubic yards × tons per cubic yard. For gravel and sand: Tons = cubic yards × 1.4 (so 3 cubic yards weigh about 4.2 tons).

Mixing concrete from bags instead? One cubic yard of finished concrete takes:

Bag sizeConcrete per bagBags per cubic yard
40 lb0.30 cubic feet90 bags
60 lb0.45 cubic feet60 bags
80 lb0.60 cubic feet45 bags

Bag yields vary a little by brand, so check the yield printed on your bag.

The full bag math is in our guide: how many 80 lb bags of concrete in a cubic yard. For a whole slab, the Concrete Calculator works out yards and bags together.

How Many Cubic Yards Fit in a Truck?

Helpful when you plan to pick the material up yourself. These are typical loads with the bed filled level to the top of the sides:

VehicleTypical load
Small / compact pickup truckabout 1 cubic yard
Full-size pickup truckabout 1.5 to 2 cubic yards
Medium dump truckabout 5 to 8 cubic yards
Large dump truckabout 10 to 14 cubic yards

Heaped loads (piled above the sides) can hold more. A full-size pickup can take about 3 cubic yards of light mulch heaped, but remember the weight: one cubic yard of gravel weighs about 1.4 tons, which is more than many pickup trucks are rated to carry. Check your truck’s payload limit before loading.

Common Sizes in Cubic Yards

Area2 in deep3 in deep4 in deep6 in deep
10 × 10 ft0.620.931.231.85
12 × 12 ft0.891.331.782.67
10 × 15 ft0.931.391.852.78
10 × 20 ft1.231.852.473.70
20 × 20 ft2.473.704.947.41
1000 sq ft area6.179.2612.3518.52

Related Calculators and Guides

This calculator gives you the volume. For a specific material or job, these finish the work:

🌱 Mulch calculator for garden beds: work out bags or cubic yards of mulch.
🪨 Gravel Calculator: cubic yards and tons of gravel for paths and driveways.
🧱 Concrete Calculator: cubic yards and bags for slabs, footings and posts.
💰 Concrete Cost Calculator: what the concrete job will cost.
🟫 Tile Calculator and 🎨 Paint Calculator: for indoor jobs measured in square feet.
📐 Square Feet Calculator: just the area, if you do not know it yet.

Guides with worked examples:
📘 How many 80 lb bags of concrete in a cubic yard
📘 How much mulch for a 10×10 bed
📘 How much concrete for a 10×10 slab

Frequently Asked Questions

How many cubic feet are in a cubic yard?

Exactly 27 cubic feet. A cubic yard is a cube 3 feet long, 3 feet wide and 3 feet deep, and 3 × 3 × 3 = 27.

How do I convert cubic feet to cubic yards?

Divide the cubic feet by 27. For example, 54 cubic feet ÷ 27 = 2 cubic yards. To go the other way, multiply cubic yards by 27.

How much area does one cubic yard cover?

It depends on the depth. At 3 inches deep, one cubic yard covers 108 square feet. At 2 inches it covers 162 square feet, and at 6 inches it covers 54 square feet.

How many bags equal one cubic yard?

For concrete mix: 90 bags of 40 lb, 60 bags of 60 lb, or 45 bags of 80 lb. For bagged soil and mulch sold by volume, a 2 cubic foot bag means 27 ÷ 2 = 13.5, so 14 bags per cubic yard.

Is a cubic yard the same as a yard?

No. A yard is a length, 3 feet long, like the side of a box. A cubic yard is a volume, the whole box filled: length × width × depth. Materials like soil, mulch and gravel are sold by the cubic yard.

How big is a cubic yard?

Picture a cube that is 1 yard on every side: 3 feet long, 3 feet wide and 3 feet tall (1 yd × 1 yd × 1 yd). It holds 27 cubic feet, about fills the bed of a small pickup truck, and covers 108 square feet at 3 inches deep.

Is a cubic yard the same as a ton?

No. A cubic yard measures space (volume) and a ton measures weight. How much a cubic yard weighs depends on the material: about 1.4 tons for gravel or sand, about 1 to 1.5 tons for topsoil, depending on how wet it is, and about 2 tons for concrete. The Tons and Bags table above has the common ones.

Is a cubic yard calculator the same as a yardage calculator?

Yes, they are two names for the same tool. “Yardage” is a common short way of saying the number of cubic yards of material a job needs.

About the author

Emily Jozuf is the editor at MyHomeCalculators. She tests every calculator on this site and checks the worked examples by hand, so the numbers you see are numbers you can trust for your project.

Digging for pavers? The Paver Calculator shows how much dirt comes out and how much base and sand to bring in.

For sand on its own, the Sand Calculator uses the same 1.4 tons standard and adds bags, a coverage table and a sandbox table.

For topsoil on its own, the Topsoil Calculator adds bag counts, a coverage table and typical depths for lawns and raised beds.

For the sod that goes over the soil, the Sod Calculator works out rolls and pallets, with an optional topsoil depth.

For a raised bed, the Raised Bed Soil Calculator splits the fill into topsoil and compost, with bags for each.

More Home Calculators