How Many Drywall Sheets for a 12×12 Room?
Updated November 2026
A 12×12 room is the classic bedroom size, and it is the room people ask about most before a drywall job. Here is the exact sheet count for that size, with the math shown slowly so you can copy the same steps for any room.
Quick Answer
A standard 12×12 room with 8 ft ceilings needs 12 sheets of drywall (4×8 sheets) for the walls. If you are also drywalling the ceiling, you need 17 sheets in total. Most people add 1 or 2 spare sheets for breakage and bad cuts.
Your room is a different size? The Drywall Calculator gives you an exact count for any room, with or without the ceiling.
The Math, Step by Step
Step 1: Total wall area. The formula is 2 × ceiling height × (length + width) = 2 × 8 × (12 + 12) = 384 sq ft. Do not subtract doors and windows: the pieces cut around them waste about as much as the opening saves, so the pros estimate the full wall. (Walls only for any room? The Wall Square Footage Calculator works out wall area on its own, and the Square Feet Calculator covers floors and ceilings.)
Step 2: Wall sheets. One 4×8 sheet covers 32 sq ft. 384 ÷ 32 = 12 sheets exactly.
Step 3: The ceiling on its own. 12 × 12 = 144 sq ft. 144 ÷ 32 = 4.5, so 5 sheets for the ceiling.
Step 4: Walls and ceiling together. Count them as one total: (384 + 144) ÷ 32 = 16.5, rounded up = 17 sheets. Counting together saves a sheet compared with rounding each part up on its own.
Step 5: Add spares. Add 1 or 2 spare sheets for breakage and bad cuts. Shops usually take back unopened sheets, so a spare costs nothing if you do not use it.
Sheet Counts for Common Room Sizes
All with 8 ft ceilings and standard 4×8 sheets. Add 1 or 2 spare sheets on top of these counts.
| Room size | Walls only | Walls + ceiling |
|---|---|---|
| 10 × 10 ft | 10 sheets | 14 sheets |
| 12 × 12 ft | 12 sheets | 17 sheets |
| 12 × 14 ft | 13 sheets | 19 sheets |
| 14 × 14 ft | 14 sheets | 21 sheets |
| 16 × 16 ft | 16 sheets | 24 sheets |
| 20 × 20 ft | 20 sheets | 33 sheets |
The room opened out flat: four walls of 96 sq ft each, plus the ceiling. The grey lines on the ceiling show where the 4×8 sheets meet.
Drywall Sheet Sizes
| Sheet size | Covers | Notes |
|---|---|---|
| 4 × 8 ft | 32 sq ft | The standard sheet, easiest for one person |
| 4 × 12 ft | 48 sq ft | Fewer seams, but heavy and hard to move |
| 4 × 16 ft | 64 sq ft | Mostly used by pros on big jobs |
All the counts on this page use the standard 4×8 sheet. If you use 4×12 sheets instead, divide the same area by 48: the walls of this room would take 8 sheets.
Mud, Tape and Screws for This Room
For the walls of a 12×12 room (12 sheets, 384 sq ft of board), plan on these supplies:
Joint compound (mud): plan on about 1 gallon per 100 sq ft of drywall for taping and two finish coats, so one 4.5-gallon bucket covers roughly 400 to 450 sq ft. The walls here are 384 sq ft, so one bucket is borderline. Buy 2 and return the spare unopened if you do not open it. Mud coverage varies by brand and coats. Check the bucket for the spread rate of your product.
Tape: one 500 ft roll is more than enough. The seams in this room add up to roughly 150 to 200 ft, depending on how the sheets are laid out.
Screws: about 32 per sheet, so roughly 384 for 12 sheets. A 1 lb box holds about 200 screws, so buy 2 boxes.
Corner bead: outside corners need corner bead to protect them, one 8 ft length per corner.
Mistakes to Avoid
Buying the exact number. Sheets break and cuts go wrong. Add 1 or 2 spare sheets; shops take back unopened ones, so a spare costs nothing if it survives.
Forgetting the closet. Closet walls and ceilings are drywall too. Measure them and add their area before you count sheets.
Using the wrong thickness on the ceiling. Walls are usually 1/2-inch board. For ceilings, use 5/8-inch board, or sag-resistant 1/2-inch board made for ceilings, so the sheets do not sag between the joists.
Your Room Is Different?
🧮 Use the Drywall Calculator: Type any room size and ceiling height and get the sheet count in seconds.
Drywall up and taped? The next job is paint. The Paint Calculator works out the gallons for the same room.
Questions People Ask
How many drywall sheets do I need for a 12×12 room?
12 sheets of 4×8 for the walls of a 12×12 room with 8 ft ceilings, and 17 sheets if you are doing the ceiling too. Add 1 or 2 spare sheets for breakage and bad cuts.
Should I subtract doors and windows?
No. The pieces cut around a door or window waste about as much board as the opening saves, so the standard way is to measure the full wall and subtract nothing.
4×8 or 4×12 ft sheets, which is better?
4×8 sheets are lighter and much easier for one person to carry and hang. 4×12 sheets cover more per sheet (48 sq ft) and leave fewer seams, but they are heavy and awkward. For the walls of this room, 4×12 sheets would take 8 sheets instead of 12.
What else do I need besides sheets?
Joint compound (about 1 gallon per 100 sq ft of board), joint tape, screws (about 32 per sheet) and corner bead for outside corners. The supplies section above has the exact counts for this room.
Can I use this method for a garage or basement?
Yes. The same math works for any rectangular room: measure the full walls, add the ceiling if you are covering it, divide by 32 for 4×8 sheets and round up. For a damp basement, use moisture resistant board.
More Example Guides
Please note: Results are planning estimates. Measure your room carefully, and follow your local building code for fire-rated or structural work.
Planning a bigger job for a customer? Our free Estimate Maker turns your numbers into a clean estimate.
