Sand Calculator

Free calculator with worked examples, a coverage table and a sandbox guide. Last updated October 2026.

This sand calculator works out how much sand a job needs: the volume in cubic yards, the weight in tons, and the number of bags, all from the size of the area and the depth. People also look for it as a sand calculator in tons, or by asking how much sand do I need. Enter the length and width, or the diameter of a round area, then the depth and an extra percentage for settling, and get the order figures with the extra already added. It covers fill and levelling work, sandboxes and pool bases, in feet and inches or in metric units. This free calculator needs no sign-up and no email.

Quick answer: A 12 × 20 ft area covered 2 in deep needs 1.48 cubic yards of sand, about 2.07 tons. With 10% extra for settling, order 1.63 cubic yards (2.28 tons).
Table of Contents

Sand Calculator

Standard figure: 1.4 tons per cubic yard (2,800 lb). If your supplier quotes a different weight per yard, type it here; the weight, the bags, the converter and the price all follow it.

Prices are materials only. Delivery and labour are not included.

Weights on this page use 1.4 tons per cubic yard unless you change the figure in the weight box. Bag counts are worked out by weight, so the bags always agree with the tons.

Tons here are US short tons (2,000 lb). A metric tonne is 1,000 kg (about 2,205 lb).

Building work: for septic systems, foundations and anything structural, the sand type and the depth come from the approved design or the local code, not from a general calculator. Use this page for the quantities once the design has set the type and the depth.

How We Calculate

This is the exact method the calculator above uses, step by step, so you can check any answer by hand:

Step 1: The area. For a rectangle, multiply the length by the width: 12 × 20 ft = 240 sq ft. For a circle, halve the diameter to get the radius, then multiply radius × radius × 3.1416: an 18 ft circle is 9 × 9 × 3.1416 = 254.47 sq ft.

Step 2: The volume. Multiply the area by the depth, with the depth in feet (inches ÷ 12). Then divide by 27 to turn cubic feet into cubic yards. The 12 × 20 ft area at 2 in deep is 240 × 2 ÷ 12 = 40 cubic feet, and 40 ÷ 27 = 1.48 cubic yards.

Step 3: The extra. The extra percentage is added to the volume, because loose sand settles once it is spread, wetted and walked on. At the standard 10%, 1.48 cubic yards becomes 1.63 cubic yards to order.

Step 4: The weight. Multiply the cubic yards by the weight of one cubic yard. The figure this page works to is 1.4 tons per cubic yard, which is 2,800 lb. Treat it as an “about” figure, not an exact one: sand is a natural material and its weight shifts with the type of sand and how wet it is. Wet sand weighs more, and your supplier’s number wins. If your supplier quotes a weight per yard, type it into the weight box in the calculator and every answer, including the converter and the price, follows that figure instead.

Step 5: The bags, counted by weight. Take the total weight in pounds and divide by the weight of one bag, then round up. Counting by weight means the bags describe the same load as the tons. A 50 lb bag of play sand also carries a volume on its label, about 1/2 cubic foot (that is QUIKRETE’s own figure for its 50 lb Play Sand bag). Count bags by that label volume and you get 54 bags per cubic yard, which is only 2,700 lb of sand, about 100 lb light against the weight for the same yard. Count by weight and you get 56 bags, and the two answers agree.

Every figure in the calculator, the worked examples and the tables on this page uses this same maths at full precision. Rounding happens only at the end, never in the middle.

The Sand Calculation Formula

The whole calculation is four short formulas:

Area (rectangle) = length × width
Area (circle) = 3.1416 × radius × radius, where the radius is half the diameter
Volume (cubic yards) = area × depth in feet ÷ 27
Weight (tons) = cubic yards × tons per cubic yard

In metric the same formulas run in meters: a 5 × 2 m area at 5 cm deep is 10 × 0.05 = 0.5 cubic meters, and at 1.66 tonnes per cubic meter it weighs 0.83 tonnes.

How Much Does a Yard of Sand Weigh?

At the standard figure this page uses, one cubic yard of sand weighs about 1.4 tons, which is 2,800 lb. In metric, one cubic meter of sand weighs about 1.66 tonnes at the same standard.

Other pages quote other figures, and that is honest disagreement, not error. The weight of sand moves with the type of sand and its moisture, and published dry weights run from about 1.3 to about 1.5 tons per cubic yard. Many calculators work to 1.35 tons (2,700 lb). Our 1.4 sits inside the same dry range; it just means our tons come out a little higher than a 1.35 page on the same job.

Wet sand weighs more, and your supplier’s number wins. Reference weight tables put wet sand at roughly a fifth more than dry sand, about 20%. A load that arrives wet is a heavier load than the same volume dry, so weighbridge figures and supplier quotes beat any figure printed here.

A yard and a ton are not the same thing. A cubic yard is space, 27 cubic feet of it. A ton is weight. The two meet only through the weight of the material, so 10 cubic yards of sand weigh about 14 tons, not 10. Run the other way, one ton of sand is 0.71 cubic yards. The converter further down this page runs the sum in both directions.

Coverage of One Cubic Yard

One cubic yard is 27 cubic feet, so the ground it covers depends only on the depth. Spread thin it goes a long way:

DepthOne cubic yard covers
1 in324 sq ft
2 in162 sq ft
3 in108 sq ft
4 in81 sq ft
6 in54 sq ft

Read the table backwards to size a job quickly. To cover 240 sq ft at 2 in deep, divide 240 by the 162 sq ft one yard covers at that depth: 240 ÷ 162 = 1.48 cubic yards, the quick-answer job at the top of this page.

Bags of Sand per Cubic Yard

Sand is sold in bags by weight, and the standard bag is 50 lb. Counted by weight, one cubic yard of sand at 2,800 lb is 2,800 ÷ 50 = 56 bags. That is the count this page uses everywhere, because it comes from the same weight as the tons.

SandWeightBags of 50 lb
0.5 cubic yards1,400 lb28 bags
1 cubic yard2,800 lb56 bags
2 cubic yards5,600 lb112 bags
3 cubic yards8,400 lb168 bags

Some bags are labelled in cubic feet instead of, or as well as, by weight. QUIKRETE’s 50 lb Play Sand bag states on the maker’s literature that it contains about 1/2 cubic foot of sand. A bag labelled by volume is fine to buy; just count what you need by the weight on the bag, and check the label before you rely on any bag count, yours or ours. If your bags are a different weight, change the bag weight in the calculator and the count follows it.

Convert Tons and Cubic Yards

Suppliers quote sand both ways, by the yard and by the ton, so the sum has to run in both directions. This converter uses the weight figure from the calculator above, 1.4 tons per cubic yard unless you changed it. Two anchors to remember: 10 tons of sand is 7.14 cubic yards, and 5 cubic yards of sand weigh 7.0 tons dry.

Tons and Cubic Yards Converter

Worked Examples

Three plain jobs worked through with the same maths as the calculator. The extra column adds the standard 10% for settling:

JobCubic yardsTonsWith 10% extra
12 × 20 ft, 2 in deep (a levelling layer)1.482.071.63 cubic yards, 2.28 tons
10 × 10 ft, 2 in deep (a small base layer)0.620.860.68 cubic yards, 0.95 tons
20 × 10 ft, 3 in deep (a thicker fill)1.852.592.04 cubic yards, 2.85 tons

The first row is the quick-answer job from the top of the page: 240 sq ft × 2 in of depth is 40 cubic feet, and the rest follows from there.

Sand for a Sandbox

For a children’s sandbox, the sand to buy is play sand. Makers wash and screen it before bagging, so it is clean, fine and free of the sharp bits that general building sand can carry. QUIKRETE’s Play Sand, for example, is described by the maker as washed, screened and dried, made for children’s play boxes and sandboxes.

How deep to fill is the other half of the question. QUIKRETE’s own bag table for play boxes is worked at three fill depths, 4 in, 6 in and 8 in, so any of those is a normal working depth. Deeper sand gives children more to dig in; whatever depth you pick, leave a few inches below the rim of the box so the sand stays in the box instead of spreading over the yard. A cover keeps rain and animals out between uses.

This table is worked at 6 in deep, counted by weight at 50 lb a bag:

Sandbox sizeCubic yardsTonsBags of 50 lb
4 × 4 ft0.300.4117 bags
6 × 6 ft0.670.9338 bags
8 × 8 ft1.191.6667 bags
10 × 10 ft1.852.59104 bags

At 4 in deep, each row takes about two thirds of the 6 in figure. For a size that is not in the table, put the box size and a 6 in depth into the calculator at the top of the page.

Sand and Pools

An above-ground pool stands on a level sand layer that goes under the liner. The Pool Factory’s installer instructions spread a 2 in layer of fine mason sand over the whole bottom within the pool wall, and installer guides generally give a layer of 1 to 2 in. It is a levelling and cushioning layer, so it has to be flat and free of stones before the liner goes down.

Worked example: an 18 ft round pool with a 2 in layer. The floor area is 3.1416 × 9 × 9 = 254.47 sq ft, the sand volume is 254.47 × 2 ÷ 12 = 42.41 cubic feet, which is 1.57 cubic yards, about 2.2 tons. Pick the circle shape in the calculator and it runs the same sum for your pool’s diameter.

Pool filter sand is a different thing. Filter sand is measured in pounds by the size of the filter, not by area and depth, so check your filter manual for the pounds your model takes; Hayward’s filter manuals, for example, list the sand in pounds for each model.

The Weight Warning: Trucks and Pickups

Sand is heavier than it looks, and weight, not space, is the limit on most jobs. One cubic yard of dry sand weighs about 1.4 tons, 2,800 lb, which is more than many pickup trucks are rated to carry in the bed. A full-size pickup bed holds about 1.5 to 2 cubic yards of material by space when loaded level, but with sand the payload limit arrives long before the bed looks full.

Two cubic yards is 5,600 lb. That is a delivery or dump truck load, not a pickup load, and an overloaded bed is hard on the truck and unsafe on the road. Check your truck’s payload rating before you load, and for anything over a yard, compare the delivery charge with the trips you would otherwise make. The truck capacity table on the Cubic Yard Calculator sets out what pickups and dump trucks hold by space.

Dry sand can be dusty. Read the safety notes on the bag, and keep the sand damp while you pour it.

Types of Sand

Play sand

A washed, screened, fine sand bagged for sandboxes and play areas. It is the clean, soft option, sold in 50 lb bags for home use.

Mason sand

A fine, washed sand. Masons mix it into mortar, and its smooth finish makes it the usual choice for the level layer under a pool liner.

Concrete sand and all-purpose sand

A coarser, washed sand. It is mixed into concrete, and it is also the kind used for levelling and for the bedding layer under pavers, where a coarse concrete sand is the standard choice.

Sharp sand and builders sand

Names you will meet on UK and Australian shelves. Sharp sand is a gritty, coarse sand used for bedding and concrete work. Builders sand, often called building sand, is a softer sand used in mortar.

Common Mistakes

1. Treating a yard and a ton as the same thing

They are different measures, space and weight, and with sand they are not even close to equal: 10 cubic yards weigh about 14 tons at the standard figure. Order 10 tons for a 10 yard job and you are more than a quarter short, about 4 tons.

2. Counting bags by volume when the order is by weight

A 50 lb bag is labelled at about 1/2 cubic foot, so the volume count gives 54 bags per cubic yard. Those 54 bags hold 2,700 lb of sand, about 100 lb less than the 2,800 lb the same yard weighs. Count bags from the weight, 56 per cubic yard, and the bags match the tons.

3. Filling a sandbox with building sand

General building sand is gritty and can be dusty and sharp. Play sand is washed and screened for children. They sit next to each other on the shelf and cost about the same, so read the bag.

4. Forgetting that sand settles

Loose sand packs down under its own weight, water and feet. Order the exact volume and the layer ends up thinner than you planned. The 10% extra in the calculator covers the normal case.

5. Loading a pickup by space instead of by payload

A yard of sand is 2,800 lb before the bed looks full. Two yards is 5,600 lb. Check the payload plate on the truck, not the size of the bed.

6. Using the pool filter figure for the pool base

The pounds in a filter manual size the sand inside the filter. The base under the pool is a separate layer, worked out by area and depth. Mixing the two leaves one of them wrong.

How Sand Is Measured Length — 20 ft Width — 10 ft Depth — 3 in
For a 3 in layer: depth in feet = 3 ÷ 12 = 0.25 ft · Volume = 20 × 10 × 0.25 = 50 cu ft = 1.85 cu yd · Weight = 1.85 × 2,800 lb ≈ 5,185 lb (about 2.6 tons) · Bags of 50 lb = 104, or 114 with 10% extra.

Frequently Asked Questions

How much sand do I need?

Work out the area, multiply by the depth, and change cubic feet into cubic yards by dividing by 27. A 12 × 20 ft area at 2 in deep is 240 × 2 ÷ 12 = 40 cubic feet, which is 1.48 cubic yards, about 2.07 tons. Add about 10% extra for settling, and order 1.63 cubic yards. The calculator at the top of this page does the whole sum for you.

How many bags of sand are in a cubic yard?

Counted by weight, 56 bags of 50 lb. One cubic yard of sand weighs about 2,800 lb at the figure this page uses, and 2,800 ÷ 50 = 56 bags. You may see 54 bags quoted elsewhere: that count comes from the volume on the bag label (a 50 lb bag holds about 1/2 cubic foot, and 27 ÷ 0.5 = 54). This page counts by weight so the bags always match the tons.

How much is a yard of sand?

By weight, one cubic yard is about 1.4 tons (2,800 lb) at the standard figure this page uses, and it covers 324 sq ft at 1 in deep. By price, there is no single answer: sand is priced by the ton, the yard or the bag, and the price changes from supplier to supplier, so type your own price into the calculator for a materials estimate.

How much sand do I need for a 10 × 10 sandbox?

At 6 in deep, a 10 × 10 ft sandbox takes 1.85 cubic yards of play sand, about 2.59 tons, which is 104 bags of 50 lb counted by weight. At 4 in deep it takes about two thirds of that. Use washed, screened play sand for a children’s sandbox.

How many yards is 10 tons of sand?

About 7.14 cubic yards. Divide the tons by the weight of one cubic yard: 10 ÷ 1.4 = 7.14. The converter on this page runs the sum both ways, tons to yards and yards to tons.

Is a cubic yard of sand the same as a ton?

No. A cubic yard measures space and a ton measures weight, and the two only meet through the weight of the material. One cubic yard of sand weighs about 1.4 tons, so 10 cubic yards of sand weigh about 14 tons, not 10.

How many tons is a yard of sand?

A cubic yard of sand weighs about 1.4 tons, around 2,800 pounds. Wet sand weighs more, about 20% more, so if your supplier gives you a weight for the sand you are buying, use theirs.

How deep should the sand be in a sandbox?

Play sand makers work their bag tables at 4, 6 and 8 in of fill, and 6 in is the depth used in the sandbox table on this page. Deeper sand gives more to dig in; leave some room below the rim of the box so the sand stays in.

How much sand goes under an above-ground pool?

A level layer of fine mason sand goes under the liner. The Pool Factory’s installer instructions spread a 2 in layer over the whole bottom inside the pool wall, and installer guides give 1 to 2 in. An 18 ft round pool at 2 in takes about 1.57 cubic yards, roughly 2.2 tons.

Does wet sand weigh more than dry sand?

Yes. Reference weight tables put wet sand at roughly a fifth more than dry sand, about 20%. That is why this page treats every weight as an about figure: wet sand weighs more, and your supplier’s number wins.

What sand should I use in a sandbox?

Play sand. It is washed and screened before it is bagged, so it is clean and fine for children to play in; QUIKRETE’s Play Sand is washed, screened and dried for play boxes. Coarse building sand is gritty and dusty by comparison, and it is made for building work, not for play.

About the author

Emily Jozuf is the editor at MyHomeCalculators. She tests every calculator on this site and checks the worked examples by hand, so the numbers you see are numbers you can trust for your project.

Sand quantities on this page are planning estimates. Sand is a natural material and its weight shifts with the type of sand and its moisture, so confirm the weight per yard with your supplier before a large order, and read the label on your own bags.