Carpet Calculator
Free calculator with square yards, roll width, seams, padding and cost. Last updated October 2026.
This carpet calculator works out the carpet to order for a room or a whole house, counting the strips, seams and run length from the roll width. It also gives padding, stairs and a materials cost. It is free with no sign-up.
Table of Contents
Carpet Calculator
Each room is worked out on its own, because the strips of one room cannot be joined to the strips of another, and then the rooms are added together. A landing can be added as a room of its own. Leftover carpet from a big room can sometimes serve a small room, so a multi-room answer is a careful one.
Auto tries both directions and keeps the one that cuts less carpet. Choose a direction yourself when the pile has to run a certain way, or when a seam must not fall in a doorway or a walkway.
Plain carpet takes about 10% extra. A pattern that has to match at the seams takes more, about 15%, and a large pattern repeat can take more still. The extra is added to the length of the run, and the run is then rounded up to the next whole foot, the way a store cuts carpet.
Each step is counted as 2 ft of carpet run, a planning allowance that covers the tread, the riser and the wrap over the edge of the step. Because that figure already carries some cutting room, its extra starts at 0%. The stairs section below explains the measure.
Prices are materials only: carpet and padding. Fitting, tack strips, door bars and old carpet removal are not included. A price per square foot is the same price times 9 per square yard: $3 per sq ft is $27 per sq yd.
Seam positions, the direction of the pile and a pattern repeat can all change a real order. Treat this answer as a careful plan, and confirm the cut with your store or installer before the carpet is ordered.
How We Calculate
This is the exact method the calculator above uses, step by step, so you can check any answer by hand:
Step 1: The floor area. Multiply the length by the width: a 12 × 12 ft room is 144 sq ft. Divide by 9 for square yards: 144 ÷ 9 = 16 sq yd of floor. This is the area the carpet has to cover, but it is not yet the amount to order.
Step 2: The strips. Carpet comes off a roll of a fixed width. The number of strips is the room’s across measure divided by the roll width, rounded up: strips = ceil(across ÷ roll width). A room no wider than the roll takes 1 strip and has no seams. Seams = strips − 1.
Step 3: The run. Each strip is cut to the room’s run measure, so the plain length to cut is strips × run. The extra percentage is added to that whole length, and the result is rounded up to the next whole foot: a 12 ft run with 10% extra is 13.2 ft, which is cut as 14 ft.
Step 4: Both directions. A room can be run along its length or along its width, and the two ways can cut very different amounts of carpet. In Auto the calculator works out both and keeps the smaller order. The direction can also be fixed by hand when the pile direction or a doorway decides it.
Step 5: The carpet to order. Multiply the rounded run by the roll width for the square feet to order, and divide by 9 for square yards. For the 12 × 12 ft room: 14 ft × 12 ft = 168 sq ft, and 168 ÷ 9 = 18.67 sq yd to order, against 16 sq yd of floor.
Step 6: Padding and stairs. Padding is counted on the floor area, not on the roll: the pad covers the floor and can be seamed anywhere, so it takes the floor square yards, plus its own small extra if one is set. Stairs are added as their own carpet: steps × stair width × 2 ft per step, plus the stairs extra.
Strips = room across ÷ roll width, rounded up
Run to order = strips × run, plus the extra %, rounded up to the next whole foot
Carpet to order = run to order × roll width (in sq ft), then ÷ 9 for sq yd
Seams = strips − 1
Padding = floor area (sq yd), plus its own extra %
Stairs carpet = number of steps × stair width × 2 ft, plus the stairs extra %
Costs are worked out from the rounded square yards shown in the answer, so a printed quantity times its price always gives the printed cost. In metric the same method runs in meters: the run is rounded up to the next 0.1 m, and standard metric rolls are 3.66 m, 4 m and 5 m wide.
Roll Widths and Seams
Almost all home carpet is woven in a few standard widths, and the width you buy decides how many strips a room takes and where the seams fall:
| Roll width | Where it fits best |
|---|---|
| 12 ft | The standard width. Covers most bedrooms and small living rooms in one strip, with no seam. |
| 13 ft 6 in (13.5 ft) | Less common. Suits rooms a little over 12 ft wide, which would otherwise need a second strip. |
| 15 ft | The wide option. Covers 13 to 15 ft rooms in one strip and saves carpet on big rooms. |
A seam is not a fault, but it should be planned: keep seams out of the middle of a walkway and out of doorways where feet turn, and run every strip with the pile facing the same way, or the pieces can look like different shades in the light. When a carpet has a pattern, the pattern has to line up across the seam, and the repeat of the pattern is cut away at each strip, which is why patterned carpet takes the bigger extra.
The roll width can change an order a lot. A 15 × 13 ft room on a 12 ft roll takes 2 strips and a 29 ft run with 10% extra, which is 38.67 sq yd. The same room on a 15 ft roll takes a single strip and a 15 ft run, which is 25 sq yd. Trying the roll widths in the calculator before you shop is free; finding out at the store is not.
Floor Area vs Carpet to Order
This table is why a simple area answer is not enough for carpet. Every row is a single room on a 12 ft roll with 10% extra, worked out by the method above:
| Room | Floor (sq yd) | Run to order (ft) | Strips | Seams | Carpet to order (sq ft) | Carpet to order (sq yd) |
|---|---|---|---|---|---|---|
| 10 × 10 ft | 11.11 | 11 | 1 | 0 | 132 | 14.67 |
| 10 × 12 ft | 13.33 | 11 | 1 | 0 | 132 | 14.67 |
| 12 × 12 ft | 16 | 14 | 1 | 0 | 168 | 18.67 |
| 12 × 15 ft | 20 | 17 | 1 | 0 | 204 | 22.67 |
| 12 × 20 ft | 26.67 | 22 | 1 | 0 | 264 | 29.33 |
| 14 × 16 ft | 24.89 | 31 | 2 | 1 | 372 | 41.33 |
| 15 × 13 ft | 21.67 | 29 | 2 | 1 | 348 | 38.67 |
Two things stand out. A room that fits inside the roll width wastes only the extra and the rounding. A room wider than the roll jumps hard, because the second strip is bought at full roll width even when only part of its width lands on the floor. That jump is real, and any calculator that only divides the area by 9 hides it.
Worked Example: A 14 × 16 ft Room
The floor is 14 × 16 = 224 sq ft, which is 224 ÷ 9 = 24.89 sq yd. On a 12 ft roll with 10% extra, both directions are tried:
Strips run along the 14 ft side (the across measure is 16 ft): strips = 16 ÷ 12, rounded up = 2. Plain length = 2 × 14 = 28 ft. With 10% extra: 28 × 1.1 = 30.8 ft, rounded up to a 31 ft run.
Strips run along the 16 ft side (the across measure is 14 ft): strips = 14 ÷ 12, rounded up = 2. Plain length = 2 × 16 = 32 ft. With 10% extra: 32 × 1.1 = 35.2 ft, rounded up to a 36 ft run.
Auto keeps the shorter run: 31 ft to cut, which is 31 × 12 = 372 sq ft, or 41.33 sq yd of carpet, with 1 seam. The padding is counted on the floor: 24.89 sq yd. An area-only answer would have said 24.89 sq yd plus 10%, about 27.4 sq yd, and the carpet would have run out on the floor.
Carpet for Stairs
Stairs are measured step by step. One step is a tread, the flat part your foot lands on, plus a riser, the upright part below it. On a typical home stair the two together measure about 17 to 18 inches. Carpet also wraps over the front edge of the step and each step is cut on its own, so this calculator uses 2 ft per step as a planning allowance:
Stairs carpet (sq ft) = number of steps × stair width (ft) × 2 ft
Example: 13 steps at 3 ft wide is 13 × 3 × 2 = 78 sq ft, which is 8.67 sq yd. How the stairs are cut from the roll depends on the installer: in small pieces fitted across the roll, or as one long strip. Ask the store how they will cut them and how much roll length to buy. Winders, the wedge steps on a turn, and landings do not follow the simple count: measure a landing as a small room of its own, and leave winders to the installer’s measure. If your own stairs measure very differently, the width and the extra boxes let you adjust the answer, and a store measure is the final word.
Padding (Underlay)
Padding goes under the whole carpet, so you need the same area of padding as floor, in square yards: a 12 × 12 ft room takes 16 sq yd of pad. The pad is not bound by the roll the way carpet is, because pad strips can be joined anywhere, so its count follows the floor and not the strips. Padding is usually priced apart from the carpet, often by the square yard, which is why this calculator gives it its own price box.
A pad is strongly advised. It makes the carpet feel softer and slows the wear, and many carpet warranties specify one; check the paperwork for your carpet. Skipping the pad to save money can shorten the carpet’s life. Old padding under a new carpet is the same story: it has already been flattened where feet fall, so plan on new pad with new carpet.
What the Carpet Costs
This calculator prices materials only, carpet plus padding, from the prices you type in. It prints no standard prices of its own, because carpet prices run from a few dollars a square yard to many times that, and a printed range would mislead more than it helps. One worked example, with example prices only:
The 12 × 12 ft room above orders 18.67 sq yd of carpet. At an example $30 per sq yd, the carpet is 18.67 × $30 = $560.10. The padding is 16 sq yd, and at an example $5 per sq yd it is $80. Total materials in this example: $640.10. Fitting is on top of that: carpet fitting is a trade job with its own local rates, so ask your installer for that figure rather than trusting any website’s range, this one included.
One price trap to know: carpet is quoted per square yard in some stores and per square foot in others, and the two look nine times apart. $3 per sq ft and $27 per sq yd are the same price. Convert every quote to the same unit before you compare, which the price unit boxes above do for you.
Common Mistakes
1. Ordering the floor area. The floor divided by 9 is the cover, not the order. The roll width and the strips decide the order, and on a room wider than the roll the difference is large.
2. Adding the extra twice. One extra, in one place. On this page it is added to the run length only; adding it to the area as well double-counts the same cutting waste.
3. Forgetting the direction of the pile. Strips laid with the pile running different ways can look like different carpets in daylight. Decide the direction before the order, not on fitting day.
4. Putting a seam in the walkway. A seam down the middle of the path everyone walks, or right at a doorway, wears and shows first. A slightly longer run that moves the seam is money well spent.
5. Measuring the room once, quickly. Walls are rarely true. Measure the length and the width at both ends, and use the larger figure; a room that is 12 ft at one end can be 12 ft 4 in at the other, and carpet does not stretch to cover a short measure.
Worked example: See How Much Carpet for a 12×12 Room? for a full room worked out step by step, including roll length and cost.
Questions People Ask
How much carpet do I need?
Work out the strips from the roll width, not just the area. A 12 × 12 ft room has 16 sq yd of floor, but on a 12 ft roll with 10% extra you order a 14 ft run, which is 168 sq ft or 18.67 sq yd. The calculator above does the strip count, the seams and the run for any room.
How many square yards of carpet do I need for a 12 × 12 room?
The floor is 16 sq yd, but on a 12 ft roll with 10% extra you order a 14 ft run, which is 168 sq ft or 18.67 sq yd. The roll width, not the floor area, sets the order.
How do I measure a room for carpet?
Measure the length and the width at both ends of the room and use the larger of each pair, because walls are rarely square. Measure into doorways and alcoves as well; a doorway strip is part of the room’s run. An odd-shaped room can be split into rectangles, measured piece by piece, and added as separate rooms above. The Square Feet Calculator helps with the area of each piece.
How much does carpet cost?
There is no single price: carpet runs from a few dollars per square yard to many times that, and padding and fitting are separate. With example prices only, the 12 × 12 ft room on this page comes to $560.10 of carpet at $30 per sq yd, plus $80 of padding at $5 per sq yd. Type your own store prices into the calculator for a figure you can shop with.
How is carpet measured for stairs?
Each step is counted as 2 ft of run, a planning allowance covering the tread, the riser and the wrap over the edge, and multiplied by the stair width: 13 steps at 3 ft wide is 13 × 3 × 2 = 78 sq ft, or 8.67 sq yd. Add a landing as a small room of its own. The stairs section above has the full measure.
How many carpet tiles do I need?
Carpet tiles are a different product from roll carpet, and this calculator is for rolls. For tiles, divide the floor area by the area of one tile: a 24 × 24 in tile covers 4 sq ft, so a 120 sq ft room takes 30 tiles before any extra. Check the coverage printed on the carton, and ask your supplier how much extra to allow for cuts, because tile cartons differ.
How much carpet does a whole house need?
Add the rooms up one by one, the way the calculator does: each room’s strips are counted on their own, because a strip cut for one room cannot run on into the next. A 12 × 12 ft room and a 12 × 10 ft room together order 33.34 sq yd of carpet and 29.33 sq yd of padding. A leftover piece from a large room can sometimes serve a small room or a cupboard, so a whole-house answer is a careful, slightly generous one.
Is carpet priced per square foot or per square yard?
Both, depending on the store, and the same carpet can be quoted either way. One square yard is 9 square feet, so divide a per-square-yard price by 9, or multiply a per-square-foot price by 9: $3 per sq ft is $27 per sq yd. Always bring quotes to the same unit before comparing them.
Do I need padding under new carpet?
Yes. Padding carries the wear and makes the carpet feel right, and many carpet warranties specify a suitable pad, so check your carpet’s paperwork. You need the same square yards of padding as floor, and it is normally priced apart from the carpet.
