Sod Calculator

Free calculator with rolls, pallets, worked examples and an optional topsoil depth. Last updated October 2026.

This sod calculator works out how much sod a lawn needs: the area, the sod to order with extra for cutting, the number of rolls and the number of full pallets. People also find it by asking how much sod do I need, how many rolls of sod for a yard, or how many pallets of sod a lawn takes. Choose a rectangle, a circle, or type an area you already know, then set the extra percentage and your supplier’s roll and pallet sizes. An optional topsoil depth can also be added when new sod is going over fresh soil. This free calculator needs no sign-up and no email.

Quick answer: A 20 × 30 ft lawn is 600 sq ft. With 5% extra for cutting, order 630 sq ft of sod, which is 63 rolls of 10 sq ft, or 2 pallets at 450 sq ft per pallet. If you also add 4 in of topsoil under the new sod, that topsoil is 7.41 cubic yards. That is the exact volume: add about 10% for settling when you order, which makes about 8.15 cubic yards, the order figure the Topsoil Calculator gives.
Table of Contents

Sod Calculator

Use 5% for a plain rectangle. Use 10% for curves, beds and trees, and 15% where the lawn is cut into many small pieces. Choosing the circle shape sets this box to 10% on its own.

A standard roll is 2 ft by 5 ft, so it covers 10 sq ft. If your supplier sells smaller pieces or slabs, either type the coverage of one piece in this box, or use the piece length and width boxes below, which work from the exact piece size.

Fill both piece boxes only when you are buying pieces or slabs instead of rolls. The calculator then counts pieces from the exact size: a 16 by 24 in piece covers 2.6667 sq ft, not the rounded 2.67, and that small difference can change the count by a piece on a big lawn.

Pallet coverage changes by supplier and farm. Many pallets cover about 450 to 500 sq ft, and the wider range runs about 400 to 600 sq ft. Check your supplier’s pallet size and change this box when it differs.

Prices are materials only. Delivery, soil preparation and labour are not included.

Leave this box empty if you only need sod. Fill it when fresh topsoil is going under new sod, and the answer adds the topsoil volume for the same area.

Rolls and pallets are rounded up, because sod is sold as whole rolls and whole pallets. The calculator does not print a sod weight, because a wet pallet and a dry pallet do not weigh the same.

How We Calculate

This is the exact method the calculator above uses, step by step, so you can check any answer by hand:

Step 1: The area. For a rectangle, multiply the length by the width: 20 × 30 ft = 600 sq ft. For a circle, halve the diameter to get the radius, then multiply radius × radius × 3.1416: a 20 ft circle is 10 × 10 × 3.1416 = 314.16 sq ft. If the area is already known, the calculator uses that area as typed.

Step 2: The extra. Add the extra percentage to the area, because edges, curves and cuts use up sod that cannot always be reused. At the standard 5%, 600 sq ft becomes 630 sq ft to order.

Step 3: The rolls. Divide the area to order by the coverage of one roll, then round up: 630 ÷ 10 = 63 rolls. A part roll still has to be bought as a whole roll, so the count always rounds up.

Step 4: The pallets. Divide the same area to order by the coverage of one pallet, then round up: 630 ÷ 450 = 1.4, so 2 pallets. Pallet coverage is a supplier figure, not a fixed standard, which is why the pallet box can be changed.

Step 5: The optional topsoil. When a topsoil depth is typed, the calculator works on the lawn area itself, without the sod extra. In feet and inches the shortcut is square feet × depth in inches ÷ 324 = cubic yards: 600 × 4 ÷ 324 = 7.41 cubic yards. That is the exact volume. The Topsoil Calculator adds about 10% for settling when it gives an order figure, which makes about 8.15 cubic yards for this same lawn.

Area (rectangle) = length × width
Area (circle) = 3.1416 × radius × radius, where the radius is half the diameter
Sod to order = area × (1 + extra ÷ 100)
Rolls = sod to order ÷ coverage of one roll, rounded up
Pallets = sod to order ÷ coverage of one pallet, rounded up
Topsoil (cubic yards) = area × depth in inches ÷ 324

In metric the same method runs in meters and centimeters. A standard 10 sq ft roll is about 0.93 sq m, and a 450 sq ft pallet is about 41.81 sq m.

Every figure in the calculator, the worked examples and the tables on this page uses this same maths. Counts of rolls and pallets are rounded up only at the end.

Rolls, Pallets and Coverage

A standard sod roll is 2 ft wide and 5 ft long, so one roll covers 10 sq ft. Pallets are less fixed. One farm may stack a pallet to cover 400 sq ft, another may sell 450, 500 or up to about 600 sq ft on a pallet. That is why this page treats the pallet box the same way the Sand Calculator treats a supplier weight: your supplier’s figure wins.

UnitCommon coverageWhat to check
One roll10 sq ftThe roll size printed or stated by the supplier, often 2 ft by 5 ft
One palletAbout 450 to 500 sq ft for many suppliersThe pallet coverage for the grass type and farm you are buying from
Rolls on one 450 sq ft pallet45 rolls at 10 sq ft eachAt 500 sq ft per pallet the same roll size gives 50 rolls per pallet
Small pieces or slabs2.6667 sq ft for a 16 in by 24 in pieceType the piece length and width in the piece boxes, or the coverage in the roll box, if you are buying pieces instead of rolls

The table below uses the calculator defaults: 5% extra, 10 sq ft per roll and 450 sq ft per pallet.

Lawn areaSod to order with 5% extraRollsPallets
100 sq ft105 sq ft111
250 sq ft262.5 sq ft271
500 sq ft525 sq ft532
1,000 sq ft1,050 sq ft1053
2,000 sq ft2,100 sq ft2105

How Much Extra to Order

Sod is cut to fit as it is laid. Straight edges waste little. Curves, tree rings, beds and paths waste more, because the cut off pieces are often too small or the wrong shape to use elsewhere.

Lawn shapeExtra to addReason
Plain rectangle or square5%Most cuts are straight and the offcuts can often be used at the next edge
Curved edges, beds or trees10%Each curve takes small cuts, and fewer offcuts fit back in
Many small areas or tight shapes15%Small pieces add up, and damaged or short rolls are harder to hide

The calculator starts at 5%, because that is the normal figure for a simple lawn. Change the extra box when the lawn shape is not simple. Ordering a little extra sod is usually cheaper than a second delivery for a few missing rolls.

Preparing the Ground and Topsoil

New sod sits on prepared ground. Old grass and weeds are removed, the soil is loosened, low spots are filled, and the surface is raked level before the first roll goes down. Where the soil is thin or poor, fresh topsoil is spread first and firmed, so the roots have a layer they can grow into.

For a new lawn, the Topsoil Calculator page uses a firmed topsoil depth of 4 to 6 in. That figure belongs to the soil layer under the sod, not to the sod itself. If you are adding topsoil as part of this job, type the depth into the optional topsoil box in the calculator. The answer gives the topsoil in cubic yards for the same lawn area, worked out from the area and depth only.

Keep the two materials separate in your order. Sod is counted by area, in rolls or pallets. Topsoil is counted by volume, in cubic yards or bags. The full soil method, depth guide and bag counts are on the Topsoil Calculator. If the ground only needs its area checked first, the Square Feet Calculator covers rectangles, circles and L-shaped areas.

Ask your supplier for screened topsoil when the soil is for a new lawn: unscreened soil can bring in weed seeds. That line also sits on the Topsoil Calculator, and it matters more before sod goes down, because weeds under new sod are hard to deal with once the lawn is laid.

One caution on the number itself: the topsoil figure in the calculator is the exact volume for the area and depth. Loose topsoil settles once it is spread and watered, so the order figure is higher. For the 20 × 30 ft lawn in the quick answer, the exact volume is 7.41 cubic yards and the order figure with about 10% for settling is about 8.15 cubic yards, which is what the Topsoil Calculator gives for the same lawn.

Odd-Shaped Lawns and Beds to Take Off

Most lawns are not one clean rectangle. The way to handle an odd shape is to split it into parts you can measure: rectangles and circles. Work out each part, add the parts together, and that total is the area to type into the calculator’s area box.

Then take off the parts that get no sod: flower beds, paths, patios, driveways and the rings around trees. Example: a 50 × 40 ft lawn is 2,000 sq ft. A flower bed of 10 × 12 ft inside it is 120 sq ft, and that bed gets no sod, so the area to order for is 2,000 − 120 = 1,880 sq ft.

An L-shaped lawn works the same way as two rectangles. Measure the long part and the side part on their own, add the two areas, take off any beds, and type the final figure into the area box. The Square Feet Calculator shows the L-shape method in full, with both ways of splitting it worked through.

Worked Examples

Three plain lawns worked through with the same maths as the calculator. The roll counts use 10 sq ft per roll, and the pallet counts use 450 sq ft per pallet:

JobAreaExtra usedRollsPallets
10 × 10 ft square patch100 sq ft5%111
20 × 30 ft lawn600 sq ft5%632
50 × 40 ft lawn2,000 sq ft5%2105
Round lawn, 20 ft across314.16 sq ft10%351

The first row shows why rounding matters. A 10 × 10 ft patch with 5% extra needs 105 sq ft of sod. At 10 sq ft per roll that is 10.5 rolls, and since a half roll cannot be bought on its own, the order is 11 rolls.

The round lawn row uses 10% extra, not 5%, because a circle is cut from straight rolls all the way around its edge. Its area is 314.16 sq ft, the sod to order is 345.58 sq ft, and 345.58 ÷ 10 = 34.56, which rounds up to 35 rolls.

Pallets or Loose Rolls?

For a small patch, loose rolls are simpler. You can collect a small count, carry them to the job, and avoid paying for a full pallet that mostly sits unused.

For a whole lawn, pallets are the normal route. Sod is heavy and it dries out. Ask your supplier how soon it should be laid in your weather, and plan the ground work so the rolls are not left sitting. A pallet keeps the rolls stacked in order and makes the delivery count plain: the supplier states the coverage on the pallet, and the calculator turns your lawn area into a pallet count from that figure.

If your supplier allows it, a mixed order can also work: full pallets for most of the lawn, plus loose rolls for the last part. To price that pattern by hand, take the full pallets first, then divide the leftover area by the roll coverage and round up. The price box in the calculator prices one buying unit at a time, per roll or per pallet, so the method stays clear.

Example only: Say a roll costs $5. For the 20 × 30 ft lawn, 63 rolls × $5 = $315. Say a pallet costs $200: 2 pallets × $200 = $400. Compare the per roll price with the per pallet price before you choose, because the cheaper unit is not always the cheaper order once the count is rounded up to whole rolls and whole pallets. Your supplier’s prices will differ; these two are examples, not rates.

Sod or Seed?

Sod is a ready-made lawn: the grass arrives grown, it is laid in a day, and the area can be used gently once the roots take hold. It costs more per square foot, and it still needs steady watering while it roots.

Seed costs far less for the same area, but it is slow. The ground stays bare for weeks, the timing matters more, and a washout or a hot spell can spoil a young seeded area. For a small patch or a tight budget, seed is a fair choice. For a lawn that must look finished at once, sod is the usual choice.

One setting-out point belongs to sod alone: a roll carries its own thin layer of soil with the roots. So finish the prepared ground about 1 in below paths, edging and sprinkler heads, leaving room for the roll itself. Confirm that drop with your farm before you level the ground, because roll thickness changes with the cutter and the grass type.

Common Mistakes

1. Ordering the exact area with no extra

The measured area is the ground, not the amount of sod used to cover it. Cuts at edges and curves are part of the job. Add 5% for a plain shape and more for curves or small pieces.

2. Trusting a pallet count without the pallet size

A pallet is not one fixed amount of sod. One supplier’s pallet may cover 400 sq ft and another may cover 500 sq ft. Ask for the coverage, then put that number in the pallet box.

3. Counting a part roll as a roll you can buy

The maths often gives a part roll, such as 10.5 rolls. Sod is sold whole, so the order rounds up to 11. The same rule applies to pallets.

4. Mixing sod area with topsoil volume

Sod covers area, so it is counted in square feet, rolls and pallets. Topsoil fills depth, so it is counted in cubic yards. Keep the two counts separate, even when both are for the same lawn.

5. Letting sod sit too long

Sod is cut grass, not a stored product. Plan the ground work first, then have the sod delivered when the area is ready to lay. Ask the supplier how soon it should be laid in your weather.

Frequently Asked Questions

How much sod do I need?

Measure the lawn area, add extra for cutting, then divide by the roll or pallet coverage. A 20 × 30 ft lawn is 600 sq ft. With 5% extra it needs 630 sq ft of sod, which is 63 rolls of 10 sq ft or 2 pallets at 450 sq ft per pallet. The calculator at the top of this page does the whole sum for you.

How many rolls of sod are in a pallet?

It depends on the pallet coverage and the roll size. At 10 sq ft per roll, a 450 sq ft pallet holds 45 rolls, and a 500 sq ft pallet holds 50 rolls. Ask your supplier for the pallet coverage, because farms do not all stack pallets the same way.

How many pallets of sod do I need for 1,000 sq ft?

With 5% extra, a 1,000 sq ft lawn needs 1,050 sq ft of sod. At 450 sq ft per pallet, 1,050 ÷ 450 = 2.33, so order 3 pallets, or 105 rolls if you are buying loose rolls.

How much does a pallet of sod weigh?

A pallet of sod often weighs about 1,500 to 3,000 lb, and moisture is the main reason for the wide range. A wet pallet after rain can be far heavier than a dry one. The calculator does not print a weight for a single order; check the weight with your supplier before you plan a pickup, and check your truck’s payload rating first.

How much extra sod should I order?

Order 5% extra for a plain rectangle or square, 10% for curved edges, beds and trees, and 15% where the lawn is made of many small pieces. The extra covers cuts and fitting, and it is cheaper than paying for a second small delivery.

What size is a roll of sod?

A standard roll is 2 ft by 5 ft, which covers 10 sq ft. Some suppliers sell other roll sizes, and some sell small pieces or slabs, such as 16 in by 24 in pieces. A piece that size covers 2.6667 sq ft exactly. Type the piece length and width into the piece boxes in the calculator and it counts from the exact size, not a rounded 2.67.

Does this calculator work out topsoil too?

Yes, when you fill the optional topsoil depth box. The topsoil is worked out from the lawn area and depth, without the sod extra: square feet × depth in inches ÷ 324 = cubic yards. A 600 sq ft lawn at 4 in deep needs 7.41 cubic yards of topsoil under the sod. That is the exact volume: add about 10% for settling when you order, about 8.15 cubic yards for that lawn, which is the order figure the Topsoil Calculator gives.

Should I buy sod by the roll or by the pallet?

Loose rolls suit a small patch. Pallets suit a whole lawn, because the delivery is counted by pallet coverage and the rolls arrive stacked together. Compare the supplier’s price per roll with the price per pallet, and use the price mode in the calculator that matches the way you will buy.

About the author

Emily Jozuf is the editor at MyHomeCalculators. She tests every calculator on this site and checks the worked examples by hand, so the numbers you see are numbers you can trust for your project.

Sod quantities on this page are planning estimates. Roll sizes and pallet coverage change by supplier, grass type and farm, so confirm both figures with your supplier before a large order.