Concrete Block Calculator

Free calculator with worked examples, wall tables and mortar estimates. Last updated October 2026.

This concrete block calculator works out how many blocks and how much mortar a wall needs. People also look for it as a cinder block calculator or a CMU calculator, and cinder block is simply the older name for the same concrete block, so the count is the same either way. Enter the wall size, take off the doors and windows, and get the blocks to buy with extra for cuts already added. This free calculator needs no sign-up and no email. It covers hollow concrete blocks laid with mortar in building walls. Retaining wall blocks are a different product and are not covered here.

Quick answer: A 10 × 8 ft wall in standard 16 × 8 in blocks needs 90 blocks. With 10% extra for cuts and breakage, buy 99 blocks, plus about 8 bags of 80 lb ready-mix mortar (QUIKRETE rates one 80 lb bag at 13 standard blocks).
Table of Contents

Concrete Block Calculator

Calculator uses the Quikrete rating of 13 blocks per bag.

The mortar estimate is for standard 16 × 8 in blocks. Smaller blocks have more joints and use more mortar.

Each standard door takes off 21 sq ft and each window 15 sq ft. Prices are optional: fill them in only if you want a materials cost.

Concrete for footings, and for filling block cores (grout), is a separate calculation: use the Concrete Calculator. Block walls carry weight. For load-bearing walls, foundations and anything structural, follow your local building code and get the wall checked by a qualified builder or engineer.

How We Calculate

This is the exact method the calculator above uses, step by step, so you can check any answer by hand:

Step 1: Wall area. Multiply the wall length by its height. A 10 ft wall that is 8 ft high is 10 × 8 = 80 sq ft.

Step 2: Take off the openings. Subtract the doors, windows and any other openings. A standard door is 21 sq ft and a standard window is 15 sq ft. The 10 × 8 ft wall above has no openings, so it stays at 80 sq ft.

Step 3: Divide by the face of one block. Block sizes are nominal, which means the size already includes the 3/8 in mortar joint around the block. A standard block has a 16 × 8 in face: 16 × 8 = 128 sq in, and 128 ÷ 144 = 0.889 sq ft per block. So each square foot of wall needs 1 ÷ 0.889 = 1.125 blocks. The 80 sq ft wall needs 80 × 1.125 = 90 blocks.

Step 4: Add the extra, in two steps. First the exact count is rounded up to a whole block. Then the extra percentage is added and the answer is rounded up again. So 90 blocks with 10% extra is 90 + 9 = 99 blocks to buy. This two-step rounding is why the buy count is always a little above the exact count.

Step 5: Work out the mortar from the bag yield. The yield comes from the bag maker’s own data sheet. QUIKRETE rates an 80 lb bag of its Mortar Mix and its Mason Mix at 13 standard blocks per bag, and Sakrete rates an 80 lb bag of its Type S Mortar/Stucco Mix at 12 standard blocks per bag. The calculator uses the QUIKRETE rating and divides by 13: 99 ÷ 13 = about 7.6, rounded up to 8 bags. The masonry cement route is worked out in the mortar section below.

The face sizes and where the numbers come from

Every blocks-per-square-foot figure on this page is just 144 divided by the face size in square inches:

Block face (length × height)Face areaBlocks per sq ft
16 × 8 in (standard)128 sq in = 0.889 sq ft1.125
12 × 8 in96 sq in = 0.667 sq ft1.5
24 × 8 in192 sq in = 1.333 sq ft0.75
16 × 4 in (half height)64 sq in = 0.444 sq ft2.25
8 × 8 in (half block)64 sq in = 0.444 sq ft2.25

Working in metric, the standard block has a nominal face of 400 × 200 mm (actual 390 × 190 mm), so the count is 12.5 blocks per sq m. 400 × 200 mm is a common metric block face; the UK uses 440 × 215 mm.

Checking by courses

Masons also count a wall in courses, the rows of blocks. Courses = wall height ÷ block height, and blocks per course = wall length ÷ block length, each rounded up. With standard blocks that is the height in feet × 1.5 courses, and the length in feet × 0.75 blocks per course. The calculator shows both numbers for planning the layout. The last course and the ends of the wall often need cut blocks, which is why the total to buy always comes from the area method above, not from multiplying the course counts.

Block Sizes: Nominal and Actual

A standard block is sold as 8 × 8 × 16 in (thickness × height × length), but if you measure one it is smaller: the actual size is 7.625 × 7.625 × 15.625 in. The missing 3/8 in is the mortar joint. The block plus its joint fills the full 16 × 8 in face, which is why all the counting on this page uses the nominal size. Never count with the actual size, or you will order about 7% too many blocks.

Nominal sizeActual size
Standard block8 × 8 × 16 in7.625 × 7.625 × 15.625 in
Standard metric block400 × 200 × 190 mm390 × 190 × 190 mm

Thickness does not change the count. The same 16 × 8 in face comes in blocks 4, 6, 8, 10 or 12 in thick. A thicker block makes a heavier, stronger wall, but it covers the same face area, so the number of blocks stays the same. Pick the thickness your plans call for; count the blocks from the face.

A standard normal weight block weighs roughly 40 lb (about 18 kg). Lightweight blocks weigh less, which matters when you plan how to carry or haul them.

Blocks for Common Wall Sizes

Standard 16 × 8 in blocks, no openings, with 10% extra included. The mortar column is 80 lb ready-mix bags at 13 blocks per bag, the QUIKRETE data sheet rating:

Wall sizeWall areaBlocks to buyReady-mix mortar (80 lb bags)
10 × 8 ft80 sq ft998
20 × 8 ft160 sq ft19816
24 × 8 ft192 sq ft23819
10 × 10 ft100 sq ft12510
20 × 10 ft200 sq ft24820
40 × 8 ft320 sq ft39631

A pallet of 8 × 8 × 16 blocks is often about 90 blocks, so ask your supplier.

Mortar: Ready-Mix Bags or Masonry Cement and Sand

There are two ways to buy mortar, and the bag counts are very different, so always check which bag you are holding.

Route 1: ready-mix bags (80 lb)

A ready-mix bag already has the sand mixed in; you only add water. The ratings are printed on the makers’ own data sheets: QUIKRETE rates an 80 lb bag of its Mortar Mix and its Mason Mix at 13 standard blocks per bag, and Sakrete rates an 80 lb bag of its Type S Mortar/Stucco Mix at 12 standard blocks per bag. That works out to about 8 bags for every 100 blocks. The calculator uses the QUIKRETE rating of 13 blocks per bag.

BlocksReady-mix bags (80 lb)
504
1008
20016
50039
1,00077

Route 2: masonry cement (70 lb) plus sand

A masonry cement bag has no sand in it; you mix the sand in yourself, at about 300 lb of sand for each bag on a typical mix design. Because one cement bag makes much more mortar, masons plan on about 3 bags of masonry cement and about 800 to 1,000 lb of sand (about half a ton) for every 100 blocks.

BlocksMasonry cement bags (70 lb)Sand
1003About 800 to 1,000 lb (0.4 to 0.5 ton)
2006About 1,600 to 2,000 lb (0.8 to 1 ton)
50015About 4,000 to 5,000 lb (2 to 2.5 tons)
1,00030About 8,000 to 10,000 lb (4 to 5 tons)

Working in metric, the bags are still US products: an 80 lb bag is 36.3 kg and a 70 lb bag is 31.8 kg, and 800 to 1,000 lb of sand is about 363 to 454 kg. Whichever route you take, check the yield on your bag label before you buy, because brands differ and the label wins over any calculator, including this one.

Tip: Mortar is wasted more easily than blocks, so buy one extra bag.

The mortar estimate is for standard 16 × 8 in blocks. Smaller blocks have more joints and use more mortar.

Doors, Windows and Other Openings

Openings are wall you do not build, so take their area off before counting blocks. The calculator subtracts standard doors and windows by count, and anything else by its total area in the other openings box. A garage door belongs in that box: a single garage door is about 63 sq ft and a double is about 112 sq ft (a double garage door alone is about 126 blocks).

OpeningStandard sizeArea to subtract
Standard door3 × 7 ft21 sq ft
Double door6 × 7 ft42 sq ft
Standard window3 × 5 ft15 sq ft
Large window4 × 5 ft20 sq ft
Sliding glass door6 ft × 6 ft 8 inAbout 40 sq ft
Garage door (single)9 × 7 ft63 sq ft
Garage door (double)16 × 7 ft112 sq ft

Worked example: a 12 × 8 ft wall is 96 sq ft. Take off one door (21) and one window (15) and 60 sq ft of wall is left. At 1.125 blocks per sq ft that is 67.5, so 68 blocks exactly, and 75 to buy with 10% extra.

Working in metric, a standard door is about 0.9 × 2.1 m (1.89 sq m) and a standard window about 0.9 × 1.5 m (1.35 sq m). The calculator uses those sizes when you pick metric units.

What the Materials Cost

The calculator adds up the materials if you type in your own prices: blocks to buy × your price per block, plus mortar bags × your price per bag. Here is the maths with example prices:

Example only: say blocks cost $2.50 each and 80 lb ready-mix bags cost $10 each. These are example prices to show the working, not a quote. For the 10 × 8 ft wall above: 99 blocks × $2.50 = $247.50, and 8 bags × $10 = $80, so the materials come to $327.50.

That total is materials only. Labour is not included, and prices change from place to place and from store to store, so enter the prices at your own store in the calculator for a real number.

Common Mistakes

1. Counting with the actual size instead of the nominal size

The actual face of a standard block is 15.625 × 7.625 in, about 0.827 sq ft. Divide by that and you order about 7% more blocks than the wall needs, because you have counted the mortar joint twice. Always count with the nominal 16 × 8 in face.

2. Forgetting the extra for cuts and breakage

Blocks get cut at the ends of courses and around openings, and a few always arrive chipped. Order the exact count and the job stops near the end. The 5% or 10% extra in the calculator covers normal cutting and breakage.

3. Counting the openings twice

If you measure the wall in pieces around a door or window, the opening is already out. Do not subtract it a second time in the openings boxes, or you will come up short.

4. Thinking a thicker block changes the count

A 12 in thick block and a 4 in thick block have the same 16 × 8 in face, so a wall takes the same number of either. Thickness changes the weight and strength of the wall, not the count.

5. Using retaining wall blocks for a building wall

Retaining wall blocks are usually solid or semi-solid, have a lip or pins at the back, and are usually laid without mortar to hold back soil. Building blocks are hollow, laid with mortar and made to carry a wall. They are different products, and this calculator only counts the building kind.

Frequently Asked Questions

How many concrete blocks do I need for a wall?

Multiply the wall area by the blocks per square foot for your block size, which is 1.125 for the standard 16 × 8 in face. Take off doors and windows first, then add extra for cuts and breakage, about 10% on a plain wall.

How many concrete blocks do I need per square foot?

1.125 blocks per square foot for the standard 16 × 8 in face. The face size already includes the mortar joint, so a 100 sq ft wall takes 112.5 blocks, say 113, before any extra for cuts.

How many blocks do I need for a 10 × 10 ft wall?

A 10 × 10 ft wall is 100 sq ft, and 100 × 1.125 = 112.5, so the wall takes 113 blocks exactly. With 10% extra for cuts and breakage, buy 125 blocks.

Is a cinder block the same as a concrete block?

Yes, for counting. Cinder block is the older name: early blocks were made with coal cinders. Blocks today are concrete masonry units, called CMU for short, but the sizes are the same, so the number you need is the same.

How much mortar do I need for 100 blocks?

It depends on the bag. QUIKRETE rates an 80 lb ready-mix bag at 13 standard blocks and Sakrete rates its 80 lb Type S bag at 12, so plan on about 8 bags per 100 blocks. With 70 lb masonry cement bags, which you mix with sand yourself, plan on about 3 bags and about 800 to 1,000 lb of sand per 100 blocks. Check the yield on your bag label, because brands differ.

Does the thickness of the block change how many I need?

No. Blocks 4, 6, 8 or 12 in thick all have the same 16 × 8 in face, and the count comes from the face. Thickness changes the weight and strength of the wall, not the number of blocks.

How many blocks do I need for a 20 × 8 ft garage wall?

A plain 20 × 8 ft wall is 160 sq ft, so at 1.125 blocks per square foot it takes 180 blocks exactly, and 198 to buy with 10% extra, plus about 16 bags of 80 lb ready-mix mortar. If the wall includes a double garage door, take off its 112 sq ft first, which is about 126 blocks fewer.

How many blocks on a pallet?

Often about 90 standard 8 × 8 × 16 in blocks on a pallet. The count changes from maker to maker, though, so ask your supplier before you plan your order around whole pallets.

Are retaining wall blocks the same as concrete blocks?

No. Retaining wall blocks are a different product: they are usually solid or semi-solid, have a lip or pins at the back, and are usually laid without mortar to hold back soil. This calculator counts hollow concrete blocks laid with mortar in building walls, so do not use it for a retaining wall.

How heavy is a standard concrete block?

Roughly 40 lb (about 18 kg) for a standard normal weight 8 × 8 × 16 in block. Lightweight blocks weigh less, and the exact weight varies by maker, so check the product label if the weight matters.

About the author

Emily Jozuf is the editor at MyHomeCalculators. She tests every calculator on this site and checks the worked examples by hand, so the numbers you see are numbers you can trust for your project.

Block counts and mortar amounts on this page are estimates for planning. Measure your wall before you buy, check the yield on your mortar bag label, and keep the extra for cuts and breakage.